Loading...

Foam-Control Insulation for Construction.

Foam-Control (molded polystyrene) insulation is used for all types of commercial and residential construction. Foam-Control insulation has a 35 year history of proven performance.

In the construction industry, Foam-Control is among the most versatile, energy efficient, and cost effective insulators available, delivering extremely high, stable R-values. Depend on Foam-Control to do the job—practically any job—from the ground up: perimeter foundation and underslab insulation, wall sheathing, EIFS insulation, roof insulation, concrete insulation/void filler, ICF insulation, and just about any construction application you can imagine.

Construction Applications

Architectural Shapes

Foam-Control gives you control over the design of your project. You determine the shape and specs of the components you need, then NoArk works with you to custom fabricate your design by hot wire cutting with computer aided design (CAD).

Cavity Wall

Foam-Control is a cost-effective, durable, and energy efficient solution for cavity wall applications. It is an ideal material to stop energy loss in brick faced residential and commercial masonry and framed walls.

Concrete Applications

Foam-Control for poured-in place and precast concrete systems reduce the requirement for concrete and overall weight. Foam-Control can been used as: concrete sandwich panel cores, block-outs/knock-outs, void fillers, custom pattern forms, and more.

Crawl Space

Foam-Control can been used as: concrete sandwich panel cores, block-outs/knock-outs, void fillers, custom pattern forms, and more. Foam-Control is a cost-effective, durable, and energy efficient solution for interior crawl space wall applications.

Exterior Sheathing

Foam-Control has superior moisture resistance, breathability, and stable R-value to protect your insulation integrity. It is an ideal material to stop energy loss through framing members.

Perimeter & Under-Slab

Foam-Control with Perform Guard® is a cost-effective, durable, and energy efficient solution for below grade insulation applications. It is an ideal material to stop energy loss at the foundation or slab. Foam-Control with Perform Guard is a proven material with built in protection against the destructive force of termites.

Protection Boards

Foam-Control Protection Boards are economical, light weight and easy to install over foundation walls that have been damp-proofed or water-proofed with coatings/membranes. Installed prior to backfilling, Foam-Control Protection Boards provide impact puncture protection for foundation wall coatings/membranes from rocks and potential construction debris in backfill soil. Protection is also provided against crushed stone/gravel used in many foundation drainage designs. In cold regions, Foam-Control Protection Boards bond-break the soil from the foundation wall and as insulation reduces potential damage of freeze thaw cycling.

Radiant Floor Boards

Foam-Control is a cost-effective, durable, and energy efficient solution for insulation applications. It is an ideal material to stop energy loss. Foam-Control Radiant Floor Boards for use in radiant floor systems are provided in two configurations:

4’ x 4’ boards with 3” on center slots for fast installation of PEX tubing in hydronic radiant systems
4’ x 8’ flat sheets for use in electric radiant systems

T&G Boards

Foam-Control T&G is a cost effective, durable and energy efficient solution for increasing the performance of stucco applications over framed walls. It is an ideal material to stop energy loss through framing members. Foam-Control T&G is available in a range of R-values to meet your local energy code requirements.

Termite Resistant

Insulation helps keep people comfortable. Unfortunately, insulations are susceptible to termite infestation. Foam-Control with Perform Guard is an important component in preventing this problem. It’s made by a process that incorporates a termite resistant additive into the insulation during the manufacturing process. The additive is registered with the Environmental protection Agency (EPA) for this application. Foam-Control with Perform Guard has been thoroughly tested, is safe for handling, and noncorrosive.

Nailbase

Foam-Control Nailbase consists of Exposure I rated Oriented Strand Board (OSB) and UL Classified Foam-Control rigid insulation. It is an ideal insulation and nailable surface for structural roof decks and walls. Stability and traffic resistance make Foam-Control Nailbase perfect for both residential/commercial roof decks and walls.

Nailbase 2-Ci

2-Ci is the ideal two-in-one continuous insulation (Ci) sheathing board. 2-Ci installs quickly over residential and commercial wood framing members using compatible pneumatic nail guns. Standard wall claddings such as wood, vinyl, stucco, cement boards, etc., and code required weather resistive barriers can be installed over 2-Ci.

Nailstrip

Foam-Control Nailstrip consists of factory installed furring strips and UL Classified Foam-Control rigid insulation. It is an ideal insulation and nailable surface when applied over structurally sound walls such as poured concrete, concrete block, brick, wood and streel framing. Stability makes Foam-Control Nailstrip perfect for both residential and commercial wall applications.

Foam-Control Roofing

Foam-Control Roof Insulations offer versatility for use in virtually all Roofing Membrane Systems. Foam-Control can by supplied as flat board stock, tapered, unfaced, or with factory applied facings or coverboards.

In the roofing industry, Foam-Control Roof Insulations are among the most versatile, energy efficient, and cost effective insulators available, delivering extremely high, stable R-values. Depend on Foam-Control to do the job as flat stock or tapered with labor-saving factory or field applied face laminates. Foam-Control is ideal for use in fully adhered, mechanically fastened, or ballasted TPO, PVC, EPDM, and other single ply membranes as well as modified bitumen and built-up roofing.